• Enterprise

    QoS Task

    If you’re looking for a task that will annoy you, this is it! Alright, currently you have a 10Mb connection to your upstream provider, you’ve been charged with implementing some basic QOS to prioritize voice traffic (marked DSCP EF). You’re told voice should be given priority of 10%, and the…

  • Enterprise - General

    Running Labs Again!

    I’m back at it! I’d be lying if I didn’t say I was considering quitting. CCIE is tough man, and failing it is soul crushing (especially failing it four times). However, the record’s 19 attempts… so I figure if anything I can at least try to top that! I have…

  • Enterprise - Service Provider

    More MPLS!

    So I can see that people like the MPLS labs, and while I’m down sizing and moving my physical lab I thought I’d crack out an MPLS lab out. This one is fun, I tried to add some extra complexity, while keeping it focused to R&S 4.0 blueprint topics. Some…

  • Enterprise

    BGP Ticket(s) – Multiple faults

    Buckle up, it’s BGP time. This ticket, or tickets features multiple fault points. I went a little overboard to be completely honest. So here we go! When all tickets are resolved, both R6 and R7 should have full readability to R1. You are not allowed to modify the configuration on…

  • Enterprise

    Working on a Fun BGP Lab

    I’m not dead and gone! I’ve just been extremely busy with work and studying. Things might calm down next week, and for the few that actually check this blog I have a fun BGP ticket coming. It’s about 75% done now, I want to toss a couple curve balls in…

  • Enterprise

    Quick EIGRP Ticket

    This is a really simple EIGRP lab, based off of a lab objective I ran into over this past weekend. There are a couple different ways to solve it, but for as simple as the topology is it makes for an interesting lab. As promised, I’ll deliver on my MPLS…

  • Enterprise

    R3’s clock is out of sync!

    You’ve just received a ticket from the NOC stating that R3’s clock is out of sync. Please make sure R3 is receiving accurate time from it’s NTP server. Also note that you may not disable any security features on any device, per company policy. Also note the solution of this…

  • Enterprise

    Starting off with the basics

    So, after a fun bout on Facebook I decided to take this troubleshooting ticket on the road! Here’s the scenario. You have two routers directly connected via a Serial connection. R1’s is assigned IP address 10.1.1.1/24 and R2 is assigned 10.2.2.2/24. Your mission, should you choose to accept it, restore…