This is a really simple EIGRP lab, based off of a lab objective I ran into over this past weekend. There are a couple different ways to solve it, but for as simple as the topology is it makes for an interesting lab. As promised, I’ll deliver on my MPLS…
-
-
Fun with MPLS – Part 1/’however many of these I feel like doing’
So you’re an Engineer for a small company with offices in Delaware and Carmel, both locations are just awful but at least in Delaware you’re near the water. Your SP provides both Layer 3 and Layer 2 MPLS VPN between both locations, you’re not entirely sure why you have both…
-
R3’s clock is out of sync!
You’ve just received a ticket from the NOC stating that R3’s clock is out of sync. Please make sure R3 is receiving accurate time from it’s NTP server. Also note that you may not disable any security features on any device, per company policy. Also note the solution of this…
-
Starting off with the basics
So, after a fun bout on Facebook I decided to take this troubleshooting ticket on the road! Here’s the scenario. You have two routers directly connected via a Serial connection. R1’s is assigned IP address 10.1.1.1/24 and R2 is assigned 10.2.2.2/24. Your mission, should you choose to accept it, restore…