So I wanted to do a couple posts on DMVPN, one of the new topics to CCIE v5. I’ll run through a basic setup in this post, with a video at the end. In the next few posts I’ll show some of the more advanced things we can do with…
-
-
Lab Hard, with a Vengeance (VPLS in GNS3!!)
So I’m finally getting back into lab mode, and getting excited out R/S technologies again. After realizing that the requirements for Cisco’s CSR1000v (Cloud Services Router) has been dramatically decreased I wanted to get one into virtualbox and throw it in the mix with GNS3. The results thus far have…
-
Looks like I’m a new INE.com instructor!
Yes sir, you read that subject line correctly! Granted, I’m only developing content for CCNA but yes I’ll be a INE.com video instructor soon enough. Which aside from the fact I get to put that on my resume, it’s something I love doing. Since I got into networking I’ve loved…
-
IPv6 6to4 Tunneling… NO STATIC ROUTE?!
So I finally got this working, with the lab from my previous post. Here’s a 6to4 tunnel, without the 2002::/16 static route, or ANY static routes for that matter.
-
More IPv6 Tunneling
So moving on from my last post, and before doing a little write up on IPv6 tunneling I thought I’d do one more scenario. So very similar to the last issue, we have an IPv4 only WAN and we want to dynamically tunnel IPv6 traffic over said WAN. Restrictions/Requirements: –…
-
IPv6 Tunneling… you might hate this one.
So, I’m going to [try] and do this one a little different. I want to start with my typical, arguably lazy approach of presenting a problem and posting a video solution. However, for fun I’ll do a closer look follow up to this one in a separate post. So here’s…